To make the most accurate copy of the Talon Knife knife from the popular computer game CS GO, you will need to download a template on the Internet. If you draw well, you can draw a sketch by hand.
Next, glue the printed template on the PVA glue to the plywood or piece of MDF, then wait until it dries, and then cut the template with a jigsaw or a band saw. The result is a kind of stencil.
We carefully grind the cut out template with sandpaper (especially the ends), and also mark the centers for the holes. Then we grab the finished template on superglue to the steel billet and trace the contours of the Talon Knife knife with an awl with victorious brazing.
The main stages of work
Without tearing off the stencil, you need to drill holes on the blade and knife handle using a drill with a diameter of 3 mm. After that, we tear off the template and drill holes of the desired diameter with a step drill.
With a small angle grinder with a cutting disc for metal, we cut out the contours of the future knife in a steel billet. Finishing and finishing the Talon Knife knife is done on the grinder.
We mark the borders of the slopes using a stencil, and we smear the end face with ink from a fountain pen to make markings in the center. We cut the oblique teeth with an engraver with a cutting disc, and also form the blade descents using metal files.
Next, we take a gas burner and do surface hardening of steel - that is, we heat the surface until a tint appears. From plywood with a thickness of 3 mm, we make overlays for the knife handle, and we connect them with brass rivets.
