You can make a large frying pan out of the old tractor disc harrow - a great idea for those who like to cook in the fresh air.
The disc harrow has a convex shape - this is, in fact, a finished frying pan, you only need to modify it a bit to make it more presentable.
Please note that from the disc harrow you can make large pans, different in shape. This article will cover both options.
The main stages of work
The first option is a rectangular pan. First you need to brew a hole in the center of the harrow. And for this, you can cut a round piece of a plate of suitable thickness, insert into the hole and scald.
Then it will be necessary to cut off the extra “petals” in order to give the pan a rectangular shape. Next, the master cleans the surface inside and out using a cord brush.
At the last stage, it remains only to weld two handles on the sides. You can make them from steel round timber, after giving it the necessary shape.
The second option of the pan
In this case, first you also need to brew a central hole in the harrow, and then cut it so that a circle is obtained.
At the next stage, in a circle, you need to weld a piece of steel strip. Well, then - two handles on the sides. As you can see, nothing complicated.
For details on how to make a large pan from a disc harrow, see the video on the site.
