Furniture

Do you often change things in your life? Most likely, many will answer this question in the negative. And completely in vain! Sometimes even an insignificant detail can work wonders: fill life with meaning, create a positive mood, and even change the worldview. Start with the interior of the apartment! The result of your work will delight daily not only you, but also everyone who lives with you.

Life does not stand still, and all things eventually become worthless, and become untidy. Prices for goods are also growing rapidly, and the financial capabilities of our compatriots do not always allow overnight updating a wardrobe or changing furniture in a house. What to do if the home interior needs improvement, but there is no money to purchase new property?

My son, pretty guilty in front of my mother, decided thus to "suck" at her, to beg forgiveness. And the way I chose for this, it seems to me, is not quite ordinary. After all, children at his age make something from plasticine, I draw a picture or at worst - they make something from paper. Therefore, by his insistent desire to make a shelf for violets, and even vertical, he made it clear: I definitely could not get out.

Cabinet furniture is assembled by many of us. And the point here is not only that it is quite profitable, but at the same time - quite simple, but also in the uniqueness of the result. After all, far from always we can go and buy exactly what you absolutely need. And most importantly - the master who collects this furniture is often just interested in the result.

A huge selection of furniture for sale does not guarantee that the right model will be found. Customization will be too expensive. And to find an artist who will make everything qualitatively difficult. The way out is to make a table with your own hands. This task is not as difficult as it might seem at first. But in the end it will turn out exactly what you expected.

In the kitchen there are places where there is not enough space for a full-fledged shelf, but something similar would not hurt. For example, there is usually not much space between the gas column and the stove, and even pipes pass from above. Just for such uncomfortable places, I propose to make a small shelf for useful little things - salt, spices, etc.

Everyone faced the problem of drying shoes in the winter. There are plenty of shoe dryers, but the central heating battery remains the most common. The only question is how to install shoes. I propose to make a dryer from the remains of the laminate floor (simultaneously solving the issue of using scraps from laying the laminate).

Pretty simple and cute design of a computer desk. Yes, of course, compared to the storefront, it is much cheaper and the design, if anything, can be changed as you like, for any interior. Advantages of this computer corner: the design is cheap and easy to manufacture. You can set any height of the countertops.

Each house should have stools. It is comfortable, multifunctional and at the same time amazingly simple furniture. The most interesting thing is that making a stool with your own hands will not be difficult. Of course, you will need certain skills, desire, imagination and tools. What will be your creation is up to you.

A computer usually stands on a table near a wall. Together with the computer, various little things are usually used, which it is desirable to keep within easy reach. For such trifles, I propose to build a compact roomy three-story shelf, which is convenient to hang on a wall next to a computer. For this you will need: - plywood 10 mm thick; - jigsaw; - drill, drill; - screws (screws) - 16 pieces; - dowel hook - 2 pieces; - grinding skin; - varnish; - self-adhesive film; - pencil, compass, ruler.

If any of you dreamed of a stylish lamp, then this wonderful, stylish, and most importantly simple lamp for you. It will fill your room with a smooth, not conspicuous, light. It will create cosiness and warmth. And accordingly save your money. What is needed to build our design lamp?

So, the autumn is slowly creeping ... And what to expect from the autumn? - Naturally rain, mud and slush. Here, first of all, naturally after you, your shoes suffer. It requires daily care. To facilitate its cleaning, I will offer you a simple device for cleaning shoes. Here it is in the picture: We will need four ordinary brushes and a few pieces of plywood or chipboard, screws or screws.

Beautiful, durable and inexpensive furniture - this is now not found. If you need the same chair, with all these parameters, then you either need to completely do it yourself, or remake a strong grandfather chair. The first option is complex and not everyone will master it, but changing the old chair from the youth of your grandfather or grandmother is quite within the power of everyone.

I got a gift from an old kitchen wall cabinet. His frame was quite decent and it was a pity to throw out such furniture, and I wanted to save on buying new kitchen furniture, which we did not have. Then I decided to restore this cabinet with a regular self-adhesive film. There were a lot of colors in the store, and the price of such a film is small.

Contents 1. Characteristics of the bar stool. 2. Tools and materials. 3. The sequence of manufacture. Bar stools are a convenient attribute for tables with a height of more than 850 mm. Outwardly, they can be similar to ordinary stools, but only with elongated legs. The height of the chair should be 300 - 350 mm lower than the level of the countertop.

It just so happens that the New Year holiday sooner or later passes and leaves behind a bunch of different garlands and decorations. I will tell you how to make the LED lampshade yourself, so that the LED garland serves for a whole year. After all, the life of the LEDs is infinitely long. We need a LED garland and lampshade.

This is a Tien cutter (named after the inventor, Phil Thien), whipped up from a 20-liter bucket. The advantage of the Tien cutter is that, unlike the traditional cyclone separator, it does not require a significant structural height, and it will occupy very little vertical space.

The modular adjustable bookshelf, according to this guide, is very easy to make, and you can have a fun weekend. The advantage of this shelf is an aluminum frame with tubes, which makes it easy to move the shelves, so they slide well. As you can see in the illustrations, the shelves are placed at a standard interval, but nothing prevented us from arranging them all at different heights.

When there is not enough space in the workshop, but you need to work somewhere, you need a small table. But best for compactness is a folding or folding table. It can be made to be lowered or, as in my case, raised. For the table we need: - Particleboard or thick plywood; - bars for legs; - two loops; - wood screws; - three powerful self-tapping screws with dowels; - three washers on 8 mm; - bar for support; - four corners; - latch; - 8 mortise furniture nuts.

One day, after a night wake, I saw that a tree fell near my neighbor’s house. The wind was very strong and did not spare him. To clean the tree, the neighbor decided to first cut it into pieces, and then leave the truck and take it out. I walked by when the tree was already sawn. And he noticed that some of the logs inside were hollow.