How to make a circular on wood from a small grinder

Pin
Send
Share
Send

Many already know that from an ordinary grinder you can make many tools for the garage and workshop, adding simple parts or devices to it. In just a few hours, you can assemble a mini circular saw from an ordinary grinder.

In this case, the craftsman needs such a homemade mini circular to make grooves of different depths in the wood blanks. However, if necessary, it can be adapted for other purposes.

The basis for the mini circular table can be a sheet of thick metal with a thickness of about 8-9 mm, which should have the shape of a corner.

What is needed to turn a grinder into a mini circular?

From two pieces of a metal plate, it will be necessary to make a bracket for mounting the grinder. Holes should be drilled in the ears, and then attached to the future table with a rotating bolt.

To fix in different positions (there will be two in total) in the table itself, you need to make a hemispherical slot.

Using the rotary mechanism, it will be possible to set the depth of cut, which is very convenient for making various grooves in the tree.

With this mini circular saw you can make various cuts or just cut the board with high accuracy. And the fact that it turned out to be heavy is even better. It will not be necessary to exert any effort, but to guide the circular along the plane. Under her weight, she will confidently saw.

Pin
Send
Share
Send

Watch the video: DIY - Angle Grinder Powered Circular Saw - ANGLE GRINDER HACKS (November 2024).