From a plastic sewer pipe with a diameter of 110 mm, you can make a wall organizer for storing self-tapping screws, screws, confirmats and other hardware.
At the same time, the organizer is hinged, which saves a little space in the workshop or garage. In addition to plastic pipes, wood blanks will also be required.
First of all, nine pieces of 10-15 cm long must be cut from a plastic pipe with a diameter of 110 mm. The organizer itself will consist of three shelves, each of which will have three pieces of pipe.
The main stages of work
The next step will require a piece of board or plywood. The master makes a marking, and then saws off 6 rails of the same length.
Then, nine circles will need to be cut from a piece of plywood 20 mm thick. We insert them into previously sliced pieces of a plastic pipe and fasten with screws.
Next, we cut six blanks from plywood, and then connect them with wooden slats. We insert three pieces of pipe inside the frame.
At the last stage, we make a rectangular frame from the boards, into which we insert the shelves. As fasteners, bolts with nuts are used.
For more information on how to make a wall-mounted organizer for storing self-tapping screws, screws, confirmates or other hardware, see the video on the website.
