In this review, the author makes a metal stand for a 20 liter water bottle. A metal hoop is fixed at the top of the makeshift stand - for installing a bowl.
It should be noted right away that the author made this stand for his old mother, so that it would be convenient for her to pour water from a large bottle into a bowl.
First of all, the author cuts four blanks from the profile (at an angle of 45 degrees), then welds a square frame from them.
To this frame, the author welded two more pieces of pipe of different lengths on the sides.
The main stages of work
At the next stage, the author cuts four more blanks from the profile pipe, and then welds them in pairs, so that in the end two parts of a T-shape are obtained.
We connect two parts with a jumper from a profile pipe - welding is used for this.
After that, the master drills holes in the first and second parts of the structure, and connects them together.
The inner part of the stand for a bottle of water is fixed with steel "fingers", and is movable.
Then it will be necessary to weld two arcs from a steel strip that will hold the bottle.
At the last stage, we weld the fasteners to which the hoop for the bowl will be attached, install the handle, and paint the entire structure.
For details on how to make a metal stand for a water bottle (20 l), see the video on our website.
