There is such a situation when the desired tool or consumable is missing. Broke, end - no matter. And it’s good if the store where you find the necessary item is nearby. In today's master class, we will focus on grinding heads with replaceable sandpaper (or cloth).
Read MoreIn this review, the author shows how you can make a simple device for hammering nails with your own hands. It is useful both at home and in the country. With it, you can hammer nails at an angle, including in hard-to-reach places. This is very convenient, since you do not need to use ladders or scaffolds.
Hello dear readers. Surely you have repeatedly seen all kinds of LCD-panels on the front of the system unit, or maybe you already managed to get hold of your own. But real modders prefer a slightly more complex and interesting process - making an LCD screen with their own hands. Today we will tell you how to use direct hands, knowledge of the basics of circuitry, patience and a little imagination to create an external display that displays information about the musical composition played by Winamp.
From unnecessary trimming of a sewer plastic pipe (preferably without sockets) with a diameter of 50 mm, a tube for storing and transporting electrodes can be made. Making this homemade product does not take much time. The tube is convenient to carry in your hands, thanks to the presence of a handle. In addition, inside it, the welding electrodes will be reliably protected from moisture, thereby increasing their shelf life.
This device can be useful in two- or three-story private houses for lifting oversized cargo. Also, the process of manufacturing a mini-crane for a home is an excellent workshop for those who like to make various interesting crafts with their own hands. For this homemade product you will need a gear unit with a worm gear.
A constant attribute of the New Year is Santa Claus. We decided to make it ourselves. Even children can create it, because there is nothing complicated about it. For this we needed: a plate from a set of disposable tableware; Double-sided tape; scissors; glue; cotton pads; white sheets of paper; colored self-adhesive fluorescent paper; still additionally needed brushes and gouache paints.
Using a homemade conductor for rolling the profile, you can make small grooves in the profile pipe - they are needed to strengthen the pipe. To make this device, you will need a piece of a metal plate 6 mm thick, as well as two bearings with an inner diameter of 25 mm. First of all, it is necessary to cut the plate into two identical parts - the base and the cover.
Some crafts are interesting not only for their purpose, but also for the original technical device. These, of course, include a combination lock. It will take time. It takes time, considerable effort, utmost accuracy and the following materials to make it: a stainless steel bolt M20 × 70; thumb wheel; tools for applying numbers to the wheels; steel balls; spring steel wire (0.3 and 0.8 mm).
Many children dream of a home children's swing. And parents seem to be ready to purchase this funny toy, but because of the lack of knowledge of where to place it, they do not dare to make their childhood dreams a reality. But the swing is not easy fun, and the sea of positive emotions for your child. Consider a simple, inexpensive and reliable method of installing a children's home toy.
I propose a simple radio microphone circuit with a range of up to 30 meters. The signal can be received on the radio (cell phone, player or on a regular, etc.) If everything is assembled correctly works without settings. The circuit uses only one transistor of the kt315 series (the store costs no more than 5 rubles) any microphone will do, I used the XF-180.
A simple to manufacture, but very effective necklace made of beads can be made using beads selected in tone or contrast, the main condition is to choose the size of the beads in such a way that the result is a smooth semicircle without distortion and curvature. To do this, we will have to weave a test sample. The work uses Japanese Matsuno and Toho beads, crystal and garnet beads, thin needles for Miyuki beads, a thread for beadwork.
The difference between this grinder is that it is not manual, but located on a bed, which can be installed on a workbench. The drive roller is driven by an electric drill, and the speed control can also be adjusted normally. Abrasive belts are made independently or taken ready from the factory tool.
Supercapacitors have tremendous capacitance compared to conventional capacitors. They also have a number of advantages over lithium-ion batteries, such as: they are not afraid of low temperatures, they are not afraid of a complete discharge. All this made me turn the bank on supercapacitors.
A compact potbelly stove as an oven for heating is a good option for a garage, a home workshop or a house in the country. You can make a potbelly stove with your own hands from a 50 liter gas cylinder (propane). Before cutting the cylinder with a grinder, it must be filled with water. To do this, you first need to unscrew the valve.
In this review, the author shares the original idea of how, with your own hands, using a minimum of tools, you can make a portable cutting table with a deep metal tray (the tray itself is purchased). Sliced vegetables and other products can be immediately “swept” with a knife into the drawer tray, which is very convenient. A cutting table is made of wood (preferably hardwood).
Replacing doors is a major event. If you have a good budget, there’s nothing complicated here - I chose and ordered, accepted and paid. As a rule, a firm does turnkey work. If it is necessary to save and install the doors yourself, then often there is a problem with their finish. People far from such a job may simply not know how to get out of some difficulties.
For convenient storage of hardware in a home workshop or garage, you can make a compact organizer with your own hands. It takes up little space on the desktop, and has many compartments, which allows you to sort hardware by functional purpose and size. For the manufacture of a compact organizer, the author uses a piece of steel pipe, three pieces of metal strip, a piece of PP pipe and plugs for plastic sewer pipes.
You don’t know where to attach the wheel from an old bicycle, but is it a pity to throw out? Use it to make a grinding machine with a foot drive, which is useful in the garage and home workshop. The emery design is quite simple, so everyone can make it. Of course, the mechanical emery is inferior in performance to the electric "brother", but it has other undeniable advantages: it is almost silent, durable and economical (it does not require electricity to work).
Children love to play, and especially if the toy seems to have come off the picture that the kid just painted. It is not difficult to bring the drawn characters to life and it gives your child a lot of joy and some magic. Today's workshop will be devoted to creating a fun toy that any child could draw.
A simple grinding tool for use in everyday life can be made from what is at hand. In this issue we will tell you how to make a budget knife sharpener with a rotary mechanism. This tool can also be used to sharpen another cutting tool. In general, the homemade product is quite versatile, and it can be done in literally 1 hour, using inexpensive materials. Read More
Copyright © 2024 Crazy hands
https://uaft2404.org gh.uaft2404.org © 2024